MAZDA RADAR CRUISE CONTROL (MRCC) WITH STOP & GO FUNCTION; WARNING: - Page 28

26

MAZDAUSA.COM

MAZDA RADAR CRUISE CONTROL (MRCC) WITH STOP & GO FUNCTION

The MRCC with Stop & Go function maintains vehicle speed and 

following distance using a radar sensor to detect a vehicle ahead. 

The driver simply presets the vehicle speed between 19 mph and  

90 mph and the system will maintain a safe following distance 
without having to turn the cruise control off or use the accelerator 
or brake pedals. If the vehicle ahead stops while you are following 
behind it, your vehicle will stop automatically.

The system operates in two modes: 

CONSTANT SPEED MODE: When no vehicle 
is detected ahead, the driver’s set speed  
is maintained.

HEADWAY CONTROL MODE: When a vehicle 
is detected ahead, a distance between your 
vehicle and the vehicle ahead is maintained.

Setting the MRCC with Stop & Go function: 

When the MODE switch is pushed, the vehicle speed and the distance 
between vehicles while in headway control can be set. The MRCC 
with Stop & Go function indication is shown in the multi-information 
display. The indicator light in the multi-information display will be 
green and will turn on simultaneously.

NOTE:

 The radar for the MRCC with Stop & Go function is located behind the Mazda 

emblem in the grille. Keep this area clean to ensure the system works properly.

How to set the speed: 

1 

Adjust the vehicle to the desired speed using the accelerator pedal.

2 

 Push the SET + or SET – switch. The set speed and the inter-vehicle distance display 
filled with white lines are displayed in the multi-information display

and the MRCC 

indicator light (green) turns on simultaneously.

3 

 Push the center of the RESUME switch to resume the set speed.

Vehicle ahead

 MRCC 
distance  
between 
vehicles

 MRCC set 
vehicle speed

MAZDA RADAR CRUISE CONTROL

WITH STOP & GO FUNCTION (IF EQUIPPED)

MODE

DISPLAY

Constant 

Speed 

Headway 

Control

WARNING: 

MRCC shuts off 
when it reaches 
the low mph limit. 

The vehicle will 

not brake/stop by 
itself. Switch the 
MRCC system off 
when not in use.

DO NOT get out 
of the vehicle 
while the stop 
hold control 
is operating.

WARNING:

Do not rely 
completely on the 
MRCC with Stop 

& Go function 
and always drive 
carefully obeying 

the speed limit.

2940111_18a_CX-9_SSG_052617b.indd   26

5/26/17   11:32 AM