Essential Safety Equipment; Child Restraint- Page 74

repeat the previous step and also this
one.

NOTE



Inspect this function before each use
of the child-restraint system. You
should not be able to pull the
shoulder belt out of the retractor
while the system is in the automatic
locking mode. When you remove the
child-restraint system, be sure the
belt fully retracts to return the
system to emergency locking mode
before occupants use the seat belts.



Follow the child-restraint system
manufacturer's instructions
carefully.
Depending on the type of
child-restraint system, it may not
employ seat belts which are in
automatic locking mode.

7. Seat your child safely in the

child-restraint system and secure the
child according to the instructions
from the child-restraint system
manufacturer.

8. Switch the ignition ON and make sure

the front passenger air bag deactivation
indicator light illuminates after
installing a child-restraint system on
the front passenger seat.
If the front passenger air bag
deactivation indicator light does not
illuminate, remove the child-restraint
system, switch the ignition to OFF, and

then re-install the child-restraint
system (page 2-84).

Essential Safety Equipment

Child Restraint

2-62

CX-9_8HT8-EA-19I_Edition3_old

2020-1-8 11:19:15