Interior Features; Interior Equipment; How to use- Page 521



When charging, do not place any item
other than the mobile device to be
charged on the Wireless Charger (Qi). In
addition, do not place any metal object,
IC card, coin, or magnetic item near the
charging area.



Remove dust or dirt from the charging
area before use.



Do not apply strong force or impact to
the Wireless Charger (Qi) or get it wet.



Use only mobile devices which support
the Wireless Charger (Qi).

How to use

1. Start the engine.
2. The power for the Wireless Charger

(Qi) turns on and the LED indicator
turns on.



The power can be turned on/off by
pressing the power button on the
Wireless Charger (Qi) for about 3
seconds.



When the power is turned off, the
LED indicator turns off.

3. Place a device compliant with the Qi

Wireless Charging standard in the
center of the charging area on the tray.



The LED indicator turns on in amber
or green when charging starts.



For details on the LED indicator,
refer to the following LED indicator
table.



Charging starts when all the doors
and liftgate are closed.



The function to reduce noise on the
radio operates if the power button is
pressed for about 1 second during
charging. Use it when noise occurs
on the radio due to interference by

the Wireless Charger (Qi). Press the
power button again for about 1
second to cancel the function.

LED indicator

The status of the Wireless Charger (Qi)
can be checked using the LED indicator.

Status

Illumination/flash

pattern

OFF

Does not turn on

Stand-by (charging is pos‐
sible)

Turns on in white

Normal charging

Turns on in amber

Fast charging

*1

Turns on in green

Normal charging (charging
efficiency is low)

Flashes in amber

Fast charging

*1

 (charging

efficiency is low)

Flashes in green

Stand-by (charging is not
possible)

Flashes in white

Charging is stopped due to
high temperature or foreign
matter detected

Flashes in red

Charging is stopped due to
internal problem or mal‐
function

Turns on in red

*

1 Some mobile devices can switch

between normal charging and fast
charging.

CAUTION



While a mobile device is placed on the
charging area, keep the vehicle key away
from the Wireless Charger (Qi). The
vehicle key may not be detected due to
radio wave interference by the Wireless
Charger (Qi).

Interior Features

Interior Equipment

5-63

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45