Interior Features; Interior Equipment- Page 522



Charging may not operate normally
under the following conditions:



The mobile device is fully charged.



There is foreign matter between the
mobile device and the charging area.



The temperature of the mobile device
is high.



The mobile device is placed with the
charging side facing upward.



The mobile device is placed in a
position extremely deviating from the
center of the charging area.



Your vehicle is in an area where strong
radio waves or electrical noise occur
such as near a television tower, power
plant, or airport.



When the power is turned off while the
Near Field Communication (NFC)
function setting of the mobile device is
on, the LED indicator turns off.



Keep the following items away from the
charging area. Otherwise the data stored
on the mobile device could be erased or
the device could malfunction.



Magnetic items such as magnets,
magnetic cards, and magnetic
recording media.



High precision devices such as
wristwatches.



Before using the Wireless Charger (Qi),
make sure to back up the data stored on
the mobile device. The data on the
mobile device could be deleted.



Do not wipe the Wireless Charger (Qi)
using oil, alcohol, or thinner, or spray
hairspray or insecticide onto it.
Otherwise, it could cause damage or
cracking.



Do not leave mobile devices in the cabin.
The temperature inside the cabin may
become very hot, causing the devices to
malfunction.

NOTE



A mobile device larger than the
charging area cannot be charged.



If the function to reduce noise on the
radio is used, fast charging may be
disabled depending on the mobile device
being charged.



If the LED indicator is flashing in amber
or green, the charging efficiency is low.
Check that there is no foreign matter
between the mobile device and the
charging area, and position the mobile
device near the center of the charging
area.



Depending on the mobile device case or
accessories used, the mobile device may
not charge, or the charging efficiency
may be reduced resulting in a longer
charging time. If charging does not start
even when a mobile device is placed on
the charging area, remove the mobile
device case or any accessories.



While the keyless entry is operating,
charging may stop temporarily, however,
this does not indicate a problem.



During charging, the Wireless Charger
(Qi) and the mobile device become
warm, however, this does not indicate a
problem.



If the mobile device temperature rises
during charging, charging may stop due
to the protection function of the device.
If that happens, wait until the mobile
device cools down sufficiently and then
recharge it.

Interior Features

Interior Equipment

5-64

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45