Essential Safety Equipment; Seat Belt Systems; Front Seat Belt - Page 26

2-14

Essential Safety Equipment

Seat Belt Systems

Form No. 8S18-EA-03I

For optimum protection, the driver and 
front passenger seat belts are equipped 
with pretensioner and load limiting 
systems.
In moderate or greater frontal or near-
frontal accidents, the front air bag and 
pretensioner systems deploy 
simultaneously. The pretensioners take up 
slack in the front seat belts as the air bags 
are expanding. The seat belt pretensioner 
system will not activate if the seat belt is 
not fastened, only you can be sure it is 
worn properly. The load limiting system 
releases belt webbing in a controlled 
manner to reduce belt force on the 
occupant

’

s chest.

Front Seat Belt 
Pretensioner and Load 
Limiting Systems

Incorrect Positioning of the Driver 
and Front Passenger Seat Belts:
Incorrect positioning of the driver 
and passenger seat belts is dangerous. 
Without proper positioning, the 
pretensioner and load limiting 
systems cannot provide adequate 
protection in an accident and this 
could result in serious injury. Wear 
seat belts only as recommended in 
this owner

’

s manual.

WARNING

Expended Seat Belt Pretensioners:
Use of front seat belts with the 
pretensioner system expended is 
dangerous.
The seat belt pretensioners will only 
function once. After they are 
expended, they will not work again 
and must be replaced immediately.
If the seat belt pretensioners are not 
replaced, the risk of injury in a 
collision will increase.
Always have an Authorized Mazda 
Dealer inspect the seat belt 
pretensioners and air bags after any 
collision. The seat belt pretensioners 
and air bags must be replaced after 
any collision, which causes them to 
deploy.

Modification or Testing of the 
Pretensioner System:
Modifying the components or wiring 
of the pretensioner system, including 
the use of electronic testing devices is 
dangerous. You could accidentally 
activate it or make it inoperable which 
would prevent it from activating in an 
accident. The occupants or repairers 
could be seriously injured. Never 
modify the components or wiring, or 
use electronic testing devices on the 
pretensioner system.

WARNING

J48C_8S18-EA-03I_Edition3.book  Page 14  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI