Owner Maintenance; Maintenance and Care; Overhead light (Rear)- Page 283

8-45

Maintenance and Care

Owner Maintenance

Form No. 8S18-EA-03I

Overhead light (Rear)

1. Wrap a small flathead screwdriver with 

a soft cloth to prevent damage to the 
lens and remove the lens by carefully 
prying on the edge of the lens with the 
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order 

of removal.

Trunk light (4 Door)

1. Press both sides of the lens cap to 

remove it.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order 

of removal.

Luggage compartment light (5 Door)

1. Insert your finger as shown in the 

figure and remove the unit.

2. Wrap a small flathead screwdriver with 

a soft cloth to prevent damage to the 
lens and remove the lens by carefully 
prying on the edge of the lens with the 
flathead screwdriver.

3. Disconnect the bulb by pulling it out.

4. Install the new bulb in the reverse order 

of removal.

Edge

J48C_8S18-EA-03I_Edition3.book  Page 45  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI