Appearance Care; Dashboard Precautions; Interior Trim- Page 295

8-57

Maintenance and Care

Appearance Care

Form No. 8S18-EA-03I

▼

Dashboard Precautions

Prevent caustic solutions such as perfume 
and cosmetic oils from contacting the 
dashboard. They

’

ll damage and discolor 

it. If these solutions get on the dashboard, 
wipe them off immediately.

▼

Cleaning the Upholstery and 
Interior Trim

Vinyl

Remove dust and loose dirt from vinyl 
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl 
cleaner.

Leather*

Real leather isn

’

t uniform and may have 

scars, scratches, and wrinkles. Clean it 
with a leather cleaner or mild soap.

Wipe it with a 

damp

 soft cloth; then dry 

and buff it with a 

dry

 soft cloth.

Fabric

Remove dust and loose dirt from fabric 
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good 
for upholstery and carpets. Remove fresh 
spots immediately with a fabric spot 
cleaner.

To keep the fabric looking clean and 
fresh, take care of it. Otherwise its color 
will be affected, it can be stained easily, 
and its fire-resistance may be reduced.

▼

Cleaning the Lap/Shoulder Belt 
Webbing

Clean the webbing with a mild soap 
solution recommended for upholstery or 
carpets. Follow instructions. Don

’

t bleach 

or dye the webbing; this may weaken it.

After cleaning the belts, thoroughly dry 
the belt webbing and make sure there is 
no remaining moisture before retracting 
them.

Interior Care

Do not use glazing agents.
Glazing agents contain ingredients 
which may cause discoloration, 
wrinkling, cracks and peeling.

CAUTION

Use only recommended cleaners and 
procedures. Others may affect 
appearance and fire-resistance.

Damaged Seat Belt:
Using damaged seat belts is 
dangerous. In a collision, damaged 
belts cannot provide adequate 
protection. Have an Authorized 
Mazda Dealer replace damaged belts 
immediately.

CAUTION

WARNING

*Some models.

J48C_8S18-EA-03I_Edition3.book  Page 57  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI