Flat Tire- Page 369
2012 Mazda MAZDA3 4-Door Mazda3 Owners Manual
Black plate (369,1)
2. Loosen the lug nuts by turning them
counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.
3. Place the jack on the ground.
4. Turn the jack screw in the direction
shown in the figure and adjust the jack
head so that it is close to the jack-up
position.
Jack head
5. Place the jack under the jack-up
position closest to the tire being
changed with the jack head squarely
under the jack-up point.
Jacking position
6. Continue raising the jack head
gradually by rotating the screw with
your hand until the jack head is
inserted into the jack-up position.
Jacking position
Tire blocks
In Case of an Emergency
Flat Tire
7-11
Mazda3_8BY6-EA-11F_Edition3 Page369
Thursday, March 1 2012 10:18 AM
Form No.8BY6-EA-11F
Detailed Information for 2012 Mazda MAZDA3 4-Door Mazda3 Owners Manual
Lists of information found in 2012 Mazda MAZDA3 4-Door Mazda3 Owners Manual - Page 369
- 2. Loosen the lug nuts by turning them counterclockwise one turn each, but do not remove any lug nuts until the tire has been raised off the ground.
- 3. Place the jack on the ground.
- 4. Turn the jack screw in the direction shown in the figure and adjust the jack head so that it is close to the jack-up position.
- 5. Place the jack under the jack-up position closest to the tire being changed with the jack head squarely under the jack-up point.
- 6. Continue raising the jack head gradually by rotating the screw with your hand until the jack head is inserted into the jack-up position.
Related Documents for 2012 Mazda MAZDA3 4-Door Mazda3 Owners Manual
All trademarks are property of their respective owners. Tightrope
Interactive