Interior Features; which has a four-digit PIN code- Page 341

5–83

Interior Features

Bluetooth

®

   NOTE

y

  If a Bluetooth 

®

  device has already 

been programmed to the vehicle as a 
hands-free mobile phone, it does not 
need to be programmed again when 
using the device as a Bluetooth 

®

   audio 

device. Conversely, it does not need to 
be programmed again as a hands-free 
mobile phone if it has already been 
programmed as a Bluetooth 

®

   audio 

device.

y

  Device registration can also be done 

using voice recognition.

  Concerning the operation of a Bluetooth 

®

audio device itself, refer to its instruction 
manual.
  Some  Bluetooth 

®

  audio devices have PIN 

codes (four digits). Refer to the audio 
device's instruction manual because the 
programming procedure differs depending 
on whether it has a PIN code or not.

  Programming  a  Bluetooth 

®

  audio device 

which has a four-digit PIN code

     1.   Using  the  audio  control  dial,  select 

the pairing program mode “ PAIR 
DEVICE ” in the “ BT SETUP ” mode. 
(Refer to “Bluetooth 

®

  audio device set-

up” for details.)

   2.   Press the audio control dial to 

determine the mode. After “ ENTER 
PIN ” is displayed on the audio display 
for three seconds, “ PIN 0000 ” is 
displayed and the PIN code can be 
input.

   3.   Input the PIN code of your Bluetooth 

®

audio device by pressing channel preset 
buttons 1 to 4 while “ PIN 0000 ” is 
displayed.

Press channel preset button 1 to input 
the fi rst digit, 2 for the second, 3 for the 
third, and 4 for the forth. For example, 
if the PIN code were “4213” press 
channel preset button 1 four times (1, 
2, 3, 4), button 2 twice (1, 2), button 
3 once (1), and button 4 three times 
(1, 2, 3). If the “ PIN 0000 ” display 
disappears before fi nishing the PIN 
code input, repeat the procedure from 
Step 1.

   NOTE

  Some devices accept only a particular 
pairing code (Usually, “0000” or 
“1234”).
  If pairing cannot be completed, refer to the 
owner's manual of your mobile device, and 
try those numbers if necessary.

   4.   Press the audio control dial while 

the input PIN code is displayed. 
“ PAIRING ”  fl ashes on the audio 
display.

   5.   Operate  the  Bluetooth 

®

  audio device 

and set it to the program mode while 
“ PAIRING ”  is  fl ashing.

   6.   When  the  programming  is  completed, 

and “ PAIR SUCCESS ” are displayed 
after about 10-30 seconds, after which 
“ PAIR SUCCESS ” continues to be 
displayed for three seconds, and then 
the unit returns to the normal display.

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD