Interior Features; which does not have a four-digit PIN - Page 342

5–84

Interior Features

Bluetooth

®

   NOTE

y

 Some Bluetooth 

®

  audio devices need a 

certain amount of time before the 
symbol is displayed.

y

  If the programming failed, “ Err ” 

fl ashes for three seconds .

y

  Programming cannot be performed 

while the vehicle is moving. If you 
attempt to perform programming 
while the vehicle is moving, “ PAIR 
DISABLE ” is displayed .

y

  If seven Bluetooth 

®

  audio devices 

have already been programmed to 
the vehicle, programming cannot be 
performed and “ MEMORY FULL ” 
is displayed. Delete one programmed 
device to program another one.

    Programming  a  Bluetooth 

®

  audio device 

which does not have a four-digit PIN 
code

     1.   Using  the  audio  control  dial,  select 

the pairing program mode “ PAIR 
DEVICE ” in the “ BT SETUP ” mode. 
(Refer to “Bluetooth 

®

  audio set up” for 

details.)

   2.   Press the audio control dial to 

determine the mode. After “ ENTER 
PIN ” is displayed on the audio display 
for three seconds, “ PIN 0000 ” is 
displayed and the PIN code can be 
input.

   3.   Press the audio control dial while “ PIN 

0000 ” is displayed. “ PAIRING ” fl ashes 
on the audio display.

   4.   Operate  the  Bluetooth 

®

  audio device 

and set it to the program mode while 
“ PAIRING ”  is  fl ashing.

   5.   As  the  Bluetooth 

®

  audio device 

requires a PIN code, input “0000”.

   6.   When  the  programming  is  completed, 

and “ PAIR SUCCESS ” are displayed 
after about 10-30 seconds, after which 
“ PAIR SUCCESS ” continues to be 
displayed for three seconds, and then 
the unit returns to the normal display.

   NOTE

y

  If pairing cannot be completed, try 

“1234” instead. Refer to the owner's 
manual of your mobile device for the 
right PIN code.

y

 Some Bluetooth 

®

  audio devices need a 

certain amount of time before the 
symbol is displayed.

y

  If the programming failed, “ Err ” 

fl ashes for three seconds.

y

  Programming cannot be performed 

while the vehicle is moving. If you 
attempt to perform programming 
while the vehicle is moving, “ PAIR 
DISABLE” is displayed .

y

  If seven Bluetooth 

®

  audio devices 

have already been programmed to 
the vehicle, programming cannot be 
performed and “ MEMORY FULL ” 
is displayed. Delete one programmed 
device to program another one.

    Device  selection

    If several devices have been programmed, 
the Bluetooth 

®

  unit links the device last 

programmed. If you would like to link 
a different programmed device, it is 
necessary to change the link. The order 
of device priority after the link has been 
changed is maintained even when the 
ignition is switched off.

   1.   Using the audio control dial, select the 

link change mode “ LINK CHANGE ” 
in the “ BT SETUP ” mode. (Refer to 
“Bluetooth

®

  audio device set-up” for 

details.)

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD