Before Driving; Doors and Locks- Page 88

3–14

Before Driving

Doors and Locks

   NOTE

y

  The system can be set to unlock all 

doors by performing a single operation.

  Refer to Personalization Features on 

page   9-12 .

y

  Use the following procedure to change 

the setting.

   1.   Switch the ignition off and close all 

of the doors and the liftgate/trunk 
lid.

   2.   Open  the  driver's  door.
   3.   Within 30 seconds of opening the 

driver's door, press and hold the 
UNLOCK button on the key for 5 
seconds or longer. The sound of 
the doors locking/unlocking can be 
heard.

    After this, the system switches the 

setting of pressing the driver's 
request switch once or twice to 
unlock all doors and the liftgate/
trunk lid each time the UNLOCK 
button is pressed (the sound of the 
doors locking/unlocking can be 
heard).

   4.   The setting change is completed by 

doing any one of the following:

y

  Switching the ignition to ACC or 

ON.

y

  Closing the driver's door.

y

  Opening the liftgate/trunk lid.

y

  Not operating the key for 10 

seconds.

y

  Pressing any button except the 

UNLOCK button on the key.

y

  Pressing a request switch.

y

  Confi rm that all doors and the liftgate/

trunk lid are securely locked.

  For the liftgate/trunk lid, move it 

without pressing the electric liftgate/
trunk lid opener to verify that the 
liftgate/trunk lid has not been left ajar.

y

  All doors and the liftgate/trunk lid 

cannot be locked when any door or the 
liftgate is open.

y

  It may require a few seconds for the 

doors to unlock after the request switch 
is pressed.

y

  A beep sound is heard for confi rmation 

when the doors and the liftgate/trunk lid 
are locked/unlocked using the request 
switch. If you prefer, the beep sound can 
be turned off. The volume of the beep 
sound can also be changed. Refer to 
Personalization Features on page  9-12 .

  Use the following procedure to change 

the setting.

   1.   Switch the ignition off and close all 

of the doors and the liftgate/trunk 
lid.

   2.   Open  the  driver's  door.
   3.   Within 30 seconds of opening the 

driver's door, press and hold the 
LOCK button on the key for 5 
seconds or longer.

    All of the doors and the liftgate/

trunk lid lock and the beep sound 
activates at the currently set volume. 
(If the beep sound is currently set 
to not activate, it will not activate.) 
The setting changes each time the 
LOCK button on the key is pressed 
and the beep sound activates at the 
set volume. (If the beep sound has 
been set to not activate, it will not 
activate.)

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD