Before Driving; Function ; Doors and Locks- Page 93

3–17

Before Driving

Doors and Locks

NOTE



  Function number 3 in the following 

table is the factory setting for your 

vehicle.



  There are only a total of five auto lock/

unlock settings available for automatic 

transaxle vehicles, and three for manual 

transaxle vehicles. Be sure to press the 

unlock side of the driver's door-lock 

switch the correct number of times 

according to the selected function 

number. If the switch is mistakenly 

pressed six times on an automatic 

transaxle vehicle or four times on a 

manual transaxle, the procedure will 

be cancelled. If this occurs, start the 

procedure from the beginning.

Function 

number

Function

*1

1

The auto door-lock function is 

disabled.

2

All the doors and the liftgate lock 

automatically when the vehicle speed 

is about 20 km/h (12 mph) or more.

3 (Factory 

Setting)

All the doors and the liftgate lock 

automatically when the vehicle speed 

is about 20 km/h (12 mph) or more. 

All the doors and the liftgate unlock 

when the ignition is switched from 

ON to Off.

4

(Automatic transaxle vehicles only)

When the ignition is switched ON 

and the shift lever is shifted from 

park (P) to any other gear position, 

all the doors and the liftgate lock 

automatically.

Function 

number

Function

*1

5

(Automatic transaxle vehicles only)

When the ignition is switched ON 

and the shift lever is shifted from 

park (P) to any other gear position, 

all the doors and the liftgate lock 

automatically.

When the shift lever is shifted to park 

(P) while the ignition is switched ON, 

all the doors and the liftgate unlock 

automatically.

*1  Other settings for the auto door lock function are 

available at an Authorized Mazda Dealer. For 

details consult an Authorized Mazda Dealer. Refer 

to Personalization Features on page 9-12.

Settings can be changed using the 

following procedure.
1.  Safely park the vehicle. All doors must 

remain closed.

2.  Switch the ignition ON.

3.  Press and hold the lock side of the 

driver's door-lock switch within 20 

seconds of switching the ignition ON, 

and make sure a beep sound is heard 

about eight seconds afterwards.

4.  Refer to the auto lock/unlock function 

setting table, determine the function 

number for the desired setting. Press 

the unlock side of the driver's door-lock 

switch the same number of times as the 

selected function number (Ex. If you 

select function 2, press the unlock side 

of the switch only 2 times).

5.  Three seconds after the function setting 

has been changed, a beep sound will 

beep in the amount of the selected 

function number. (Ex. Function number 

3 = 3 beep sounds)

Mazda3_8FA4-EA-15G_Edition3.indb   17

2015/12/04   19:22:12