Manual Transaxle Operation; Manual Transaxle Shift Pattern; Manual Transaxle Shift- Page 161

Manual Transaxle Shift

Pattern

Neutral position

The shift pattern of the transaxle is
conventional, as shown.
 
Depress the clutch pedal all the way down
while shifting; then release it slowly.
 
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
 

WARNING

Do not use sudden engine braking on
slippery road surfaces or at high speeds:

Shifting down while driving on wet, snowy,
or frozen roads, or while driving at high
speeds causes sudden engine braking,
which is dangerous. The sudden change in
tire speed could cause the tires to skid. This
could lead to loss of vehicle control and an
accident.

Always leave the shift lever in 1 or R
position and set the parking brake when
leaving the vehicle unattended:

Otherwise the vehicle could move and
cause an accident.

CAUTION



Keep your foot off the clutch pedal except
when shifting gears. Also, do not use the
clutch to hold the vehicle on an upgrade.
Riding the clutch will cause needless
clutch wear and damage.



Do not apply any excessive lateral force
to the shift lever when changing from 5th
to 4th gear. This could lead to the
accidental selection of 2nd gear, which
could result in damage to the transaxle.



Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is still
moving may damage the transaxle.

When Driving

Manual Transaxle Operation

4-29

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21