When Driving; Mazda Radar Cruise Control (MRCC)- Page 223

4–97

When Driving

Mazda Radar Cruise Control (MRCC)

   NOTE

y

  When accelerating using the  SET 

switch while in headway control, the set 
vehicle speed can be adjusted but 
acceleration is not possible. If there is 
no longer a vehicle ahead, acceleration 
continues until reaching the set vehicle 
speed. Check the set vehicle speed by 
viewing the set vehicle speed display in 
the active driving display.

y

  When depressing the accelerator pedal, 

the inter-vehicle distance display in 
the display in the instrument cluster 
changes to the white-line display.

y

  The minimum settable speed is 30 km/h 

(19 mph). If the set vehicle speed 
reaches 30 km/h (19 mph) using the 
switch operation, constant speed travel 
is maintained at about 30 km/h (19 
mph) even if the  SET   switch is pressed. 
The Mazda Radar Cruise Control 
(MRCC) system is not canceled.

  To  Deactivate

    The Mazda Radar Cruise Control (MRCC) 
is canceled when the OFF switch is 
pressed.

  When the system is temporarily 
canceled

    In the following cases, the Mazda Radar 
Cruise Control (MRCC) system is 
temporarily canceled and the “MRCC 
Cancelled” indication is displayed in 
the display in the instrument cluster. 
The Mazda Radar Cruise Control 
(MRCC) indicator light (green) turns off 
simultaneously.

y

 The  CANCEL  switch is pressed.

y

 The brake pedal is depressed.

y

 The parking brake is applied.

y

 The selector lever is shifted to park (P), 

neutral (N) or reverse (R) (automatic 
transaxle).

y

 The shift lever is in the reverse (R) 

position (manual transaxle).

y

 In the following cases, the “MRCC 

Cancelled” indication is displayed and 
the beep sounds one time.

y

 The vehicle speed decreases to less 

than 25 km (16 mph).

y

 The DSC has operated.

y

 The TCS has operated for a certain 

period of time.

y

 The Smart City Brake Support (SCBS) 

has operated.

y

 When traveling on a down slope for a 

long period of time.

y

 There is a problem with the system.

y

 The engine stalls.

(Manual transaxle)

y

 The shift lever is shifted to neutral (N) 

for a certain period of time.

y

 The clutch is depressed for a certain 

period of time.