Owner Maintenance; Maintenance and Care- Page 434

6–34

Maintenance and Care

Owner Maintenance

   3.   Tilt the blade assembly and remove it 

from the arm.

CAUTION

  To prevent damage to the windshield 
let the wiper arm down easily, do not 
let it slap down on the windshield.

   4.   Pull down the blade rubber and slide it 

out of blade holder.

   5.   Remove the metal stiffeners from each 

blade rubber and install them in the 
new blade.

CAUTION

¾

  Do not bend or discard the stiff eners. You 

need to use them again.

¾

  If the metal stiff eners are switched, 

the blade's wiping effi

  ciency could be 

reduced.

  So do not use the driver's side metal 

stiff eners on the passenger's side, or vice 
versa.

¾

  Be sure to reinstall the metal stiff eners in 

the new blade rubber so that the curve 
is the same as it was in the old blade 
rubber.

   6.   Carefully insert the new blade rubber. 

Then install the blade assembly in the 
reverse order of removal.