Owner Maintenance; Maintenance and Care- Page 448

6–48

Maintenance and Care

Owner Maintenance

   4.   Turn  the  screw  counterclockwise  and 

remove it, and then partially peel back 
the mudguard.

   5.   Disconnect the connector from the unit 

by pressing the tab on the connector 
with your fi nger and pulling the 
connector downward.

   6.   Turn the socket and bulb assembly 

to remove it. Carefully remove the 
bulb from its socket in the refl ector by 
gently pulling it straight backward out 
of the socket.

   7.   Install the new bulb in the reverse order 

of the removal procedure.

  High-beam  bulbs/Daytime  running 
lights

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Lift  the  hood.
   3.   Disconnect the connector from the unit 

by pressing the tab on the connector 
with your fi nger and pulling the 
connector downward.