Personalization Features- Page 584

9–18

Specifi cations

Personalization Features

 Item 

 Feature 

 Factory 

Setting

 Available 

Settings

 Settings change method 

 Active 
driving
display
  Refer  to 
Active
Driving
Display
on page 
 4-18 . 

 Turn-by-
Turn (TBT) 

 Setting can be 
changed so that 
the Turn-by-Turn 
(TBT) of the Active 
driving display is 
not displayed. 

 On 

 On/Off 

 Refer  to 

Active

driving
display

on page 

 4-18 . 

 — 

     *1   Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends 

that these systems remain On.

   *2   For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed. 

The warning sound is only a beep.

   *3   Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The 

volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.

   *4   If the auto-wiper control is set to Off, the wiper lever 

 position is set to intermittent operation.

   *5   If the setting is changed to Off, the following operation is performed according to the headlight switch position:

y

    At 

 position: Headlights turn off immediately after the ignition is switched off.

y

    At any position other than 

: Headlights do not turn off after the ignition is switched off.

   *6   When set to Off, the lights-on reminder is operable.
   *7   The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to 

Off. Refer to Lights-On Reminder on page  7-35 .

   *8   Available only in display from the center display.