Before Driving; Doors and Locks- Page 92

3–18

Before Driving

Doors and Locks

   4.   Refer to the auto lock/unlock function 

setting table, determine the function 
number for the desired setting. Press 
the unlock side of the driver's door-lock 
switch the same number of times as the 
selected function number (Ex. If you 
select function 2, press the unlock side 
of the switch only 2 times).

   5.   Three seconds after the function setting 

has been changed, a beep sound will 
beep in the amount of the selected 
function number. (Ex. Function number 
3 = 3 beep sounds)

(Manual transaxle vehicles)

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Function Number 3

Press 4 times

Press unlock side of 
lock switch once

Cancel setting

Cancel setting

Function set (The 
number of beeps 
heard is the same as 
the selected function 
number)

Press lock side of
lock switch

Wait for 3 second

(Automatic transaxle vehicles)

Press unlock side of 
lock switch once

Press 2 times

Press 3 times

Current Function Number

Function Number 1

Function Number 2

Press 4 times

Function Number 3

Press 5 times

Function Number 4

Press 6 times

Function Number 5

Cancel setting

Cancel setting

Function set (The 
number of beeps 
heard is the same as 
the selected function 
number)

Press lock side of
lock switch

Wait for 3 second

   NOTE

y

  The doors cannot be locked or unlocked 

while the setting function is being 
performed.

y

  The procedure can be cancelled by 

pressing the lock side of the driver's 
door-lock switch.