Owner Maintenance; Maintenance and Care- Page 456

6–52

Maintenance and Care

Owner Maintenance

*

Some models.

Fog lights

*

1.  If you are changing the right bulb, start 

the engine, turn the steering wheel all 

the way to the left, and turn off engine. 

If you are changing the left bulb, turn 

the steering wheel to the right, and turn 

off engine.

2.  Make sure the fog light switch is off.

3.  Pull the center of each plastic retainer 

and remove the retainers.

Removal

Installation

4.  Turn the screw counterclockwise and 

remove it, and then partially peel back 

the mudguard.

5.  Disconnect the connector from the unit 

by pressing the tab on the connector 

with your finger and pulling the 

connector downward.

6.  Turn the socket and bulb assembly 

to remove it. Carefully remove the 

bulb from its socket in the reflector by 

gently pulling it straight backward out 

of the socket.

7.  Install the new bulb in the reverse order 

of the removal procedure.

Mazda3_8FA4-EA-15G_Edition1.indb   52

2015/05/11   14:02:24