Before Driving; Doors and Locks; Front passenger door request switch- Page 90

3–14

Before Driving

Doors and Locks

Front passenger door request switch

To unlock all doors and the liftgate, press 

the request switch. A beep sound will be 

heard twice and the hazard warning lights 

will flash twice.

NOTE



  The system can be set to unlock all 

doors by performing a single operation.

  Refer to Personalization Features on 

page 9-12.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close all 

of the doors and the liftgate/trunk 

lid.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

UNLOCK button on the key for 5 

seconds or longer (the sound of 

the doors locking/unlocking can be 

heard).

  After this, the system switches the 

setting of pressing the driver's 

request switch once or twice to 

unlock all doors and the liftgate 

each time the UNLOCK button is 

pressed (the sound of the doors 

locking/unlocking can be heard).

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the liftgate/trunk lid.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

UNLOCK button on the key.



  Pressing a request switch.



  Confirm that all doors and the liftgate 

are securely locked.

  For the liftgate/trunk lid, move it 

without pressing the electric liftgate/

trunk lid opener to verify that the 

liftgate/trunk lid has not been left ajar.



  All doors and the liftgate cannot be 

locked when any door or the liftgate is 

open.



  It may require a few seconds for the 

doors to unlock after the request switch 

is pressed.



  A beep sound is heard for confirmation 

when the doors and the liftgate are 

locked/unlocked using the request 

switch. If you prefer, the beep sound can 

be turned off.

  The volume of the beep sound can also 

be changed. Refer to Personalization 

Features on page 9-12.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close all 

of the doors and the liftgate/trunk 

lid.

2.  Open the driver's door.

Mazda3_8FA4-EA-15G_Edition3.indb   14

2015/12/04   19:22:11