If Trouble Arises; Battery Runs Out- Page 506

2017 Mazda MAZDA3 5-Door Mazda3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

4. When Driving
8. Customer Information and Reporting Safety Defects
background image

7–18

If Trouble Arises

Battery Runs Out

1.  Remove the battery cover.

 

2.  Make sure the booster battery is 12 

V and that its negative terminal is 

grounded.

3.  If the booster battery is in another 

vehicle, do not allow both vehicles 

to touch. Turn off the engine of the 

vehicle with the booster battery and 

all unnecessary electrical loads in both 

vehicles.

4.  Connect the jumper cables in the exact 

sequence as in the illustration.

 Connect one end of a cable to the 

positive terminal on the discharged 

battery (1).

 Attach the other end to the positive 

terminal on the booster battery (2).

 Connect one end of the other cable to 

the negative terminal of the booster 

battery (3).

 Connect the other end to the ground 

point indicated in the illustration 

away from the discharged battery (4).

5.  Start the engine of the booster vehicle 

and run it a few minutes. Then start the 

engine of the other vehicle.

6. 

(With i-ELOOP system)

  The i-ELOOP indicator light may flash 

after the engine is started. The indicator 

light turns off when the engine is 

running and the charging is completed. 

Make sure the i-ELOOP indicator light 

is turns off before driving.

 

NOTE

  If the vehicle is driven with the 

i-ELOOP indicator light flashing, a 

beep sound is heard.

  If the steering wheel is operated with 

the i-ELOOP indicator light flashing, it 

may feel heavier than normal, however, 

this does not indicate a malfunction. 

The steering operation will return to 

normal when the i-ELOOP indicator 

light turns off.

  Do not remove the jumper cables while 

the i-ELOOP indicator light is flashing.

7.  When finished, carefully disconnect the 

cables in the reverse order described in 

the illustration.

8.  If the battery cover has been removed, 

install it in the reverse order of 

removal.

NOTE

Verify that the covers are securely 

installed.

Mazda3_8FL6-EA-16F_Edition2.indb   18

2016/08/10   17:39:17

Detailed Information for 2017 Mazda MAZDA3 5-Door Mazda3 Owners Manual

Lists of information found in 2017 Mazda MAZDA3 5-Door Mazda3 Owners Manual - Page 506

  • 1. Remove the battery cover.
  • 2. Make sure the booster battery is 12 V and that its negative terminal is grounded.
  • 3. If the booster battery is in another vehicle, do not allow both vehicles to touch.
  • 4. Connect the jumper cables in the exact sequence as in the illustration.
  • 5. Start the engine of the booster vehicle and run it a few minutes.
  • 6. (With i-ELOOP system) The i-ELOOP indicator light may flash after the engine is started.
  • 7. When finished, carefully disconnect the cables in the reverse order described in the illustration.
  • 8. If the battery cover has been removed, install it in the reverse order of removal.

Related Documents for 2017 Mazda MAZDA3 5-Door Mazda3 Owners Manual