Child-Restraint System Suitability for Various Seat Positions Table; Positions Table; Essential Safety Equipment- Page 53

Child-Restraint System Suitability for Various Seat

Positions Table

▼

Child-Restraint System Suitability for Various Seat Positions Table

(Mexico)

Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
When installing a child-restraint system, the following points must be observed:



Always remove the head restraint before installing a child-restraint system. However,
when installing a backless booster seat, always install the vehicle head restraint to the seat
where the backless booster seat is installed. In addition, always use a tether strap and
attach it securely. Refer to Head Restraints on page 2-17.



When installing a child-restraint system to the front passenger seat, adjust the seat slide
position as far back as possible.
Refer to Adjusting the Front Passenger's Seat on page 2-13.



When it is difficult to install a child-restraint system to the front passenger seat, or the seat
belt cannot be secured to the child-restraint system, perform the following operations to
adjust the seat holding the child-restraint system so that the seat belt can be secured
completely to it.



Move the seat forward or back.



Move the seatback forward or back.



When installing a child-restraint system to the rear seat, adjust the front seat position so
that the front seat does not contact the child-restraint system.
Refer to Adjusting the Driver's Seat on page 2-5.
Refer to Adjusting the Front Passenger's Seat on page 2-13.



When installing a child-restraint system equipped with a tether, remove the head restraint.
Refer to Head Restraints on page 2-17.



An i-Size child-restraint system refers to a child-restraint system which has acquired
i-Size category certification for the UN-R 129 regulation.

When installing a child-restraint system to the rear seat, refer to the child-restraint system
manufacturer's instructions and the Using ISOFIX Lower Anchor on page 2-50.

Seating position

Passenger

Rear (Left)

Rear (Center)

Rear (Right)

Seating position suit‐
able for universal
belted (Yes/No)

Yes (UF)

Yes (U)

Yes (U)

Yes (U)

Essential Safety Equipment

Child Restraint

2-39

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58