Replacing Interior Light Bulbs; Owner Maintenance; Overhead lights/Front map lights,- Page 34

4. Pull the center of each plastic retainer

and remove the retainers.

1. Removal
2. Installation
 

5. Turn the screw counterclockwise and

remove it, and then partially peel back
the mudguard.

6. Turn the socket and bulb assembly

counterclockwise and remove it.

7. Disconnect the bulb from the socket.
8. Install the new bulb in the reverse

order of the removal procedure.

▼

Replacing Interior Light Bulbs

Overhead lights/Front map lights,
Overhead light (Rear), Vanity mirror
lights, Luggage compartment light (5–
Door)

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Trunk light (4–Door)

1. Press both sides of the lens cap to

remove it.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse

order of the removal procedure.

Maintenance and Care

Owner Maintenance

6-37

Mazda3_8HZ1-EA-19G_Edition1_old

2019-5-17 13:49:03