How to set the speed; Indication on multi-information; Indication on active driving dis-- Page 267

How to set the speed

Adjust the vehicle speed to the desired setting using the accelerator pedal and press

the RES switch up (SET+) or down (SET

-

) to start headway control.

The set speed is indicated on the display. At the same time, the MRCC standby

indication (white) changes to the MRCC set indication (green).

Travel status

Indication on multi-information

display

Indication on active driving dis-

play

During travel at constant speed

During travel under headway
control

NOTE



If a vehicle ahead is detected while traveling at a constant speed, the

vehicle-ahead indication is displayed and headway control is performed.

Additionally, when a vehicle ahead is no longer detected, the vehicle-ahead

indication turns o

ff

 and the system switches back to travel at constant speed.



The lowest possible speed which can be set on the MRCC system is 30 km/h (19

mph).



Headway control is not possible if the vehicle ahead is driving faster than your

vehicle's set speed. Adjust the system to the desired vehicle speed using the

accelerator pedal.

How to set the distance-between-vehicles during headway control

The distance-between-vehicles can be set to 4 levels; Long, medium, short, and

extremely short distance.

The distance-between-vehicles is set to a shorter distance by pressing the CANCEL

switch down. The distance-between-vehicles is set to a longer distance by pressing

the CANCEL switch up.

When Driving

i-ACTIVSENSE

4-125

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34