Seat Slide; Seat Recline; Erasing programmed driving positions- Page 27

NOTE



When adjustment of the driving

position is not necessary, a sound is

not activated.



The driving position adjustment is

canceled in the following cases:



The seat adjustment switch on the

driver's seat is operated.



The angle of the outer mirrors is

adjusted.



The SET button is pressed.



Programming button 1 or 2 is

pressed.



The lock button or unlock button

on the transmitter is pressed.



The vehicle starts moving.



The active driving display is

adjusted.



(Manual transmission)

The parking brake is released.



(Automatic transmission)

The selector lever is shifted to a

position other than P.

Erasing programmed driving positions
Erasing the driving positions

programmed to the key

1. Switch the ignition OFF.

2. Press the SET button continuously

until a sound is activated.

3. Press the lock button on the

transmitter within 5 seconds after

the sound is activated.

NOTE

If you do not perform the operation

correctly, a sound indicating that the

programming has failed is activated.

▼

Adjusting the Front Passenger's

Seat

1.

Seat Slide

To move a seat forward or

backward, raise the lever and slide

the seat to the desired position and

release the lever.

Make sure the lever returns to its

original position and the seat is

locked in place by attempting to

push it forward and backward.

2.

Seat Recline

To change the seatback angle, lean

forward slightly while raising the

lever. Then lean back to the desired

position and release the lever.

Make sure the lever returns to its

original position and the seatback is

locked in place by attempting to

push it forward and backward.

Essential Safety Equipment

Seats

2-13

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34