Changing the set vehicle speed- Page 290

2. Adjust the vehicle speed to the desired setting using the accelerator pedal and

press the RES switch up (SET+) or down (SET

-

) to start headway control.

The set speed is indicated on the display. At the same time, the TJA standby

indication (white) changes to the TJA set indication (green).

3. The headway control is operable when all of the conditions for it to operate are

met, or the steering assist function is operable when all of the conditions for it to

operate are met.

NOTE



If a vehicle ahead is detected while traveling at a constant speed, the

vehicle-ahead indication is displayed and headway control is performed.

Additionally, when a vehicle ahead is no longer detected, the vehicle-ahead

indication turns o

ff

 and the system switches back to travel at constant speed.



Headway control is not possible if the vehicle ahead is driving faster than your

vehicle's set speed. Adjust the system to the desired vehicle speed using the

accelerator pedal.



When the ignition is switched OFF, the system status before it was turned o

ff

 is

maintained. For example, if the ignition is switched OFF with the TJA operable, the

TJA remains operational the next time the ignition is switched ON.



When the TJA switch is pressed while the Mazda Radar Cruise Control (MRCC) or

the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) system is operating, the TJA operates. In addition, when the MRCC

switch is pressed while the TJA is operating, the Mazda Radar Cruise Control

(MRCC) or the Mazda Radar Cruise Control with Stop & Go function (MRCC with

Stop & Go function) system operates.

Changing the set vehicle speed
(To accelerate/decelerate using the RES switch)

When the RES switch is pressed up (SET+), the vehicle accelerates and when the RES

switch is pressed down (SET

-

), it decelerates.



Press and release immediately: 1 km/h (1 mph)



Press and hold: 10 km/h (5 mph)

(To increase speed using accelerator pedal)

Depress the accelerator pedal and press the RES switch up (SET+) or down (SET

-

) at

the desired speed. If the switch is not operated, the system returns to the set speed

after you release your foot from the accelerator pedal.

When Driving

i-ACTIVSENSE

4-148

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34