When Driving- Page 313



The method for parking/stopping

the vehicle using the 360°View

Monitor di

ff

ers depending on the

road circumstances/conditions and

the vehicle conditions. When and

how much you turn the steering

wheel will di

ff

er depending on the

situation, , therefore always check

the vehicle surroundings directly with

your eyes while using the system.

Also, before using the system, always

make sure that the vehicle can be

parked/stopped in the parking/

stopping space.

NOTE



If there are water droplets, snow, or

mud on the camera lens, wipe it o

ff

using a soft cloth. If the camera lens

is especially dirty, wash it o

ff

 with

mild detergent.



If the camera lens is touched or there

is any dirt on it, it could a

ff

ect the

screen image. Wipe the lens using a

soft cloth.



If the area where the camera is

installed, such as the front/rear

bumper or door mirrors, has been

damaged in a vehicle accident, the

camera (position, installation angle)

may have shifted. Always consult an

Authorized Mazda Dealer to have

the vehicle inspected.



If the camera is subjected to

excessive changes in temperature

such as by pouring hot water on the

camera during cold weather, the

360°View Monitor may not operate

normally.



If the vehicle is driven during cold

temperatures and the camera

temperature decreases, the top view

and the side view may become

unclear. However, this does not

indicate a problem. If the vehicle is

stopped for a while and the camera

temperature increases, the top view

and the side view will return to the

normal condition.



If the battery voltage is low, the

screen might be temporarily di

ffi

cult

to view, however, this does not

indicate a problem.



The 360°View Monitor has

limitations. Objects under the

bumper or near both ends of the

bumper cannot be displayed.



Obstructions above the upper image

range of the camera are not

displayed.



Under the following conditions, the

screen might be di

ffi

cult to view,

however this does not indicate a

problem.



The temperature near the lens is

high/low.



Rainy conditions, water droplets

on the camera, or high humidity.



Mud or foreign matter near the

camera.



Extremely bright light such as

sunlight or headlights hitting the

camera lens directly.



The surroundings are illuminated

by vehicle lights, 

fl

uorescent lights,

or LED lights (display may 

fl

icker).



Extremely small dark or white dots

appear on the screen (dots may

fl

icker).



Because the 360°View Monitor

camera uses a special lens, the

distance displayed on the screen

di

ff

ers from the actual distance.

When Driving

i-ACTIVSENSE

4-171

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34