Parking lights/Front side-marker; lights (Type B)- Page 477



Rear side-marker lights



Brake lights



Taillights



Reverse lights



License plate lights

The LED bulb cannot be replaced as a

single unit because it is an integrated

unit.

The LED bulb has to be replaced with

the unit. We recommend an

Authorized Mazda Dealer when the

replacement is necessary.

Bulb type
Parking lights/Front side-marker

lights (Type B)

1. Make sure the ignition is switched

o

ff

, and the headlight switch is o

ff

.

2. If you are changing the left bulb,

start the engine, turn the steering

wheel all the way to the right, and

turn o

ff

 engine. If you are changing

the right bulb, turn the steering

wheel to the left.

3. Pull the center of each plastic

retainer and remove the retainers.

1. Removal

2. Installation

4. Pull the center of each plastic

retainer and remove the retainers.

1. Removal

2. Installation

5. Turn the screw counterclockwise

and remove it, and then partially

peel back the mudguard.

6. Turn the socket and bulb assembly

counterclockwise and remove it.

7. Disconnect the bulb from the

socket.

8. Install the new bulb in the reverse

order of the removal procedure.

Maintenance and Care

Owner Maintenance

6-39

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34