1. Notch- Page 503

CAUTION

Align the notch on the wheel cover

with the valve stem when installing

it.

1. Notch

2. Tire valve

Damage could occur during

installation if the wheel cover is not

properly aligned.

2. Loosen the lug nuts by turning them

counterclockwise one turn each,

but do not remove any lug nuts

until the tire has been raised o

ff

 the

ground.

NOTE

If your Mazda is equipped with the

optional antitheft wheel lug nuts, a

special key must be used to unlock

the locking lug nut for each wheel.

For details, refer to the Locking Lug

Nuts on page 7-11.

3. Place the jack on the ground.

4. Turn the jack screw in the direction

shown in the 

fi

gure and adjust the

jack head so that it is close to the

jack-up position.

1. Jack head

If Trouble Arises

Flat Tire

7-9

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34