Essential Safety Equipment- Page 63

5. To get the retractor into the

automatic locking mode, pull the

shoulder belt portion of the seat

belt until the entire length of the

belt is out of the retractor.

6. Push the child-restraint system

fi

rmly into the vehicle seat. Be sure

the belt retracts as snugly as

possible. A clicking noise from the

retractor will be heard during

retraction if the system is in

automatic locking mode. If the belt

does not lock the seat down tight,

repeat the previous step and also

this one.

NOTE



Inspect this function before each

use of the child-restraint system.

You should not be able to pull the

shoulder belt out of the retractor

while the system is in the

automatic locking mode. When

you remove the child-restraint

system, be sure the belt fully

retracts to return the system to

emergency locking mode before

occupants use the seat belts.



Follow the child-restraint system

manufacturer's instructions

carefully.

Depending on the type of

child-restraint system, it may not

employ seat belts which are in

automatic locking mode.

7. Seat your child safely in the

child-restraint system and secure

the child according to the

instructions from the child-restraint

system manufacturer.

8. Switch the ignition ON and make

sure the front passenger air bag

deactivation indicator light

illuminates after installing a

child-restraint system on the front

passenger seat.

If the front passenger air bag

deactivation indicator light does

not illuminate, remove the

child-restraint system, switch the

ignition to OFF, and then re-install

the child-restraint system (page

2-71).

Essential Safety Equipment

Child Restraint

2-49

Mazda3_8JM2-EA

-

20H_Edition1_new

2020-7-10 17:21:34