Always check the Owner’s Manual for more operating information and safety features ; Tip: Headlights switch off auto-; matically within 30 seconds if- Page 5

D R I V E R   C O N T R O L S

Always check the Owner’s Manual for more operating information and safety features 

Driver

Controls

Switches

1

2

= Fog lights on: Rotate knob

(

2

); functions only with headlight 

low beams on
Turn signals right/left: Move lever
up/down.

Tip: Headlights switch off auto-
matically within 30 seconds if
lights are left on and switch is
in lock position or key removed.

Wiper/washer control lever

Intermittent wiper: One click down. 
To change interval speed:
Rotate inner ring (

3

).

Normal wiper speed: Two 
clicks down.
Fast wiper speed: Three 
clicks down.
Single wipe: Push stalk up.
Washer: Pull stalk back.

Rear window wiper/washer
(5-Door) 

To activate rear interval wiper:
Rotate knob (

4

) up to INT.

To activate rear normal speed
wiper: Rotate knob (

4

) up to ON.

To activate rear washer with
wipers operating: Rotate knob 
(

4

) up to      ; hold knob (

4

) 

to continue washing; release 
knob and wipers will continue 
to operate. 
To operate stand alone wipe/
wash function: Rotate knob 
(

4

) down and hold, release 

to stop.

Front window switches 

One-touch down/up: Press/pull
AUTO switch (

3

) firmly and

release, window goes down/up 
all the way, press/pull briefly 
to stop, press/pull lightly and 
hold for normal operation.

Tip: During closing window
operation, window will stop
and open partway if object 
blocks window operation.

Rear window switches

Push/pull (

4

) to open/close.

Power window lockout switch

Press button (

5

), only driver's 

window operates; press again 
for normal operation.

Power window 
initialization procedure

If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function.

Resetting procedure:
1. Turn ignition switch 

to “ON” position.

2. Make sure that power 

window lock switch located 
on driver’s door is not 
depressed.

3. Press switch and fully open 

power window.

4. Pull up switch to fully close 

power window and continue 
holding switch for about 
2 seconds after window 
fully closes.

5. Repeat steps 3-4 for front 

passenger power window 
while seated in front 
passenger seat.

6. Make sure power windows 

operate correctly using 
door switches.

Dual power
mirrors

Ignition switch
must be in ACC 
or ON position.
Switch is on 
driver’s door.

To adjust left/right mirror: 
Press selector switch (

1

) left/

right, press switch (

2

) in direction

of desired movement.

Tip: To lock mirrors in place,
move selector switch (

1

) to 

center position.

Power window
switches

With ignition ON.
All windows 
controlled from
driver’s armrest;
passenger doors
have separate
switches.

Turn signal/lighting 
control lever

OFF

= Lights off
= Tail, parking and 

dashboard lights on: Rotate 
knob (

1

) to first notch

= Tail, parking, dashboard

and headlights on: Rotate knob
(

1

) to second notch

High beams on/off: Push lever 
forward/pull back to detent.
To flash high beams: Pull lever
back slightly and release.

3

4

REAR

5

4

3

AU

TO

AU

TO

L

R

2

1