Driving Your Mazda; Switches and Controls; programming is complete- Page 139

5-45

Driving Your Mazda

Switches and Controls

Form No. 8R29-EA-02I

4. After the HomeLink indicator light 

changes from a slow to a rapidly 
blinking light, release both the 
HomeLink and hand-held transmitter 
buttons.

5. Press and hold the just-trained 

HomeLink button and observe the 
indicator light.

If the indicator light

 stays on constantly, 

programming is complete

 and your 

device should activate when the 
HomeLink button is pressed and released.

If the indicator light blinks

 rapidly for 

two seconds and then turns to a 
constant light, continue with 
"Programming" steps 6—8

 to complete 

the programming of a rolling code 
equipped device (most commonly a 
garage door opener).

6. At the garage door opener receiver 

(motor-head unit) in the garage, locate 
the "learn" or "smart" button. This can 
usually be found where the hanging 
antenna wire is attached to the motor-
head unit.

7. Firmly press and release the "learn" or 

"smart" button. (The name and color of 
the button may vary by manufacturer.)

8. Return to the vehicle and firmly

 press, 

hold for two seconds and release

 the 

programmed HomeLink button. Repeat 
the 

"press/hold/release"

 sequence a 

second time, and, depending on the 
brand of the garage door opener (or 
other rolling code equipped device), 
repeat this sequence a third time to 
complete the programming process.

HomeLink should now activate your 
rolling code equipped device.

For questions or comments, please contact 
HomeLink at www.homelink.com or 

1-800-355-3515.

NOTE

If the HomeLink indicator light does 
not change to a rapidly blinking light, 
contact HomeLink at 
www.homelink.com or call 1-800-355-
3515 for assistance.

NOTE

To program the remaining two 
HomeLink buttons, begin with 
"Programming" 

 - step 2. Do not 

repeat step 1.

NOTE

There are 30 seconds in which to 
initiate step 8.

NOTE

To program the remaining two 
HomeLink buttons, begin with 
"Programming" 

 - step 2. Do not 

repeat step 1.

J56J_8R29_EA_02I_Edition4.book  Page 45  Monday, April 21, 2003  3:44 PM