Replacing Interior Light Bulbs- Page 477

2016 Mazda Mazda6 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

4. When Driving
8. Customer Information and Reporting Safety Defects
background image

Black plate (477,1)

Taillights (Trunk lid side)

Reverse lights

6. Install the new bulb in the reverse order

of the removal procedure.

License plate lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Wrap a flathead screwdriver with a soft

cloth to prevent damage to the lens,
and then remove the lens by carefully
prying on the edge of the lens with a
flathead screwdriver.

3. Disconnect the bulb by pulling it out.

4. Install the new bulb in the reverse order

of the removal procedure.

q

Replacing Interior Light Bulbs

Overhead lights/Front map lights (LED
type), Rear map lights (LED type)

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Overhead lights/Front map lights (Bulb
type), Rear map lights (Bulb type),
Vanity mirror lights

í

, Courtesy lights

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Maintenance and Care

Owner Maintenance

6-55

í

Some models.

Mazda6_8EA2-EA-14K_Edition5 Page477
Friday, November 27 2015 5:0 PM

Form No.8EA2-EA-14K

Detailed Information for 2016 Mazda Mazda6 Owners Manual

Lists of information found in 2016 Mazda Mazda6 Owners Manual - Page 477

  • 6. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with a flathead screwdriver.
  • 3. Disconnect the bulb by pulling it out.
  • 4. Install the new bulb in the reverse order of the removal procedure.
  • 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens, and then remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.
  • 2. Disconnect the bulb by pulling it out.

Related Documents for 2016 Mazda Mazda6 Owners Manual