Active Driving Display; When Driving; Always adjust the display brightness and position with the vehicle stopped:- Page 153

Active Driving Display

*

Combiner

Optical receiver

Mirror

WARNING

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as doing
so could distract your attention from the road ahead and lead to an accident.

CAUTION



Do not try to adjust the angle or open/close the active driving display manually.
Fingerprints on the display will make it difficult to view and using excessive force when
operating it could cause damage.



Do not place objects in the vicinity of the active driving display. The active driving display
may not operate or any interference with its operation could cause damage.



Do not place beverages near the active driving display. If water or other liquids are splashed
on the active driving display, it could cause damage.



Do not place objects above the active driving display or apply stickers to the dust-proof
sheet/optical receiver as they will cause interference.



A sensor is integrated to control the display's luminosity. If the optical receiver is covered,
the display's luminosity will lower making the display difficult to view.



Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

NOTE



Wearing polarized sunglasses will reduce the visibility of the active driving display due to
the characteristics of the display.



If the battery has been removed and re-installed or the battery voltage is low, the adjusted
position may deviate.

When Driving

Instrument Cluster and Display

*Some models.

4-27

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49