System Operation; Multi-information Display; Active Driving Display- Page 305

▼

System Operation

Make sure that the LAS & LDWS OFF
indicator light in the instrument cluster is
turned off. When the LAS & LDWS OFF
indicator light is turned on, press the
switch and make sure that the indicator
light turns off.

When the ignition is switched ON, the
system goes on standby.
Drive the vehicle in the center of the
vehicle lane while the system is on
standby. When all of the following
conditions are met, and the system
becomes operational.



The engine is running.



The vehicle speed is about 60 km/h (37
mph) or faster.



The system detects white (yellow) lane
lines on both the right and left sides.



The driver is operating the steering
wheel.



The driving lane is neither narrow nor
wide.

When the system becomes operational, the
LAS & LDWS indication (white) is
displayed on the multi-information display
or active driving display.

Instrument Cluster (Type A)

Multi-information Display

Instrument Cluster (Type B)

Active Driving Display

If the indication on the active driving
display has been turned off using the
personalization features, the LAS &
LDWS indication (white) is displayed on
the multi-information display.
 

When Driving

i-ACTIVSENSE

4-167

Mazda6_8JN3-EA-20H_Edition1_old

2020-6-18 17:31:27