5-10
Driving Your Mazda
Starting and Driving
Form No. 8Q47-EA-01F
▼
Shift-Lock Override
If the shift lever won’t move from P with
the brake pedal depressed, continue to
hold down the pedal.
1. Remove the shift-lock override cover
with a screwdriver.
2. Insert a screwdriver and push it down.
3. Push and hold the lock-release button.
4. Move the shift lever.
5. Take the vehicle to an Authorized
Mazda Dealer to have the system
checked.
▼
Hold Mode
The hold mode stops the automatic speed-
change operation and has three positions:
third (D), second (S), and first (L).
Hold operation
Use the hold mode when starting from a
stop on slippery surfaces, when driving up
steep inclines, and for braking assistance
on downgrades.
Push the hold button to activate the hold
mode. Push it again to deactivate it.
When the hold mode is on
D (Drive)
The transaxle is held in third. It
automatically downshifts to a lower gear
at a stop, however, and returns to third for
smoother acceleration.
S (Second)
The transaxle is held in second. Don’t
drive faster than 102km/h (63mph).
L (Low)
The transaxle is held in first. Don’t drive
faster than the speeds indicated in the
following:
Shift-up patterns with hold mode on
2.5 liter V6 DOHC
46km/h
(28mph)
Miller Cycle Engine V6
DOHC
56km/h
(34mph)
D-Hold
3rd (temporarily lowers gears
for standing start)
S-Hold
2nd (fixed)
L-Hold
1st (fixed)
Hold button
J76Y.book Page 10 Wednesday, March 27, 2002 5:04 PM