Essential Safety Equipment; Child Restraint; Third-Row Outboard Seats - Page 49

2-41

Essential Safety Equipment

Child Restraint

Form No. 8Q44-EA-01K

▼

Third-Row Outboard Seats 
Child-Restraint System 
Installation

Follow these instructions when using a 
child-restraint system.

1. Secure the child-restraint system with 

the lap portion of the lap/shoulder belt. 
See the instructions on the child-
restraint system for belt routing 
instructions.

2. To get the retractor into the automatic 

locking mode, pull the shoulder belt 
portion of the seat belt until the entire 
length of the belt is out of the retractor.

3. Push the child-restraint system firmly 

into the vehicle seat. Be sure the belt 
retracts as snugly as possible. Clicking 
from the retractor will be heard during 
retraction if the system is in the 
automatic locking mode. If the belt 
does not lock the seat down tight, 
repeat this step.

Child-Restraint Tether Usage:
Using the tether to secure anything 
but a child-restraint system is 
dangerous. This could weaken or 
damage the tether or tether anchor 
and result in injury. Use the tether 
and tether anchor only for a child-
restraint system.

NOTE

Follow the child-restraint system 
manufacturer’s instructions carefully. 
Depending on the type of child-
restraint system, it may not employ 
seat belts which are in automatic 
locking mode.

WARNING

J16L_EA.book  Page 41  Friday, February 22, 2002  11:34 AM