Driving Your Mazda; Ignition Switch Positions; Ignition Key Reminder- Page 140

5-2

Driving Your Mazda

Form No. 8S06-EA-03H

Starting and Driving

▼

Ignition Switch Positions

LOCK

The steering wheel locks to protect 
against theft. Only in this position can the 
key be removed.

ACC (Accessory)

The steering wheel unlocks and some 
electrical accessories will operate.

ON

This is the normal running position after 
the engine is started. The warning lights 
(except brakes) should be inspected 
before the engine is started (page 5-24).

START

The engine is started in this position. It 
will crank until you release the key; then 
it returns to the ON position. The brake 
warning light can be checked after the 
engine is started (page 5-24).

▼

Ignition Key Reminder

If the ignition switch is in the LOCK or 
ACC position, a beep sound will be heard 
when the driver’s door is opened.

Ignition Switch

Removing the Key:
It’s dangerous to remove the key from 
the ignition switch while the vehicle is 
moving. Removing the key allows the 
steering wheel to lock. You will lose 
steering control and a serious 
accident could occur.
Remove the key only when the vehicle 
is parked.

Not Setting the Parking Brake:
Leaving the driver’s seat without 
setting the parking brake is 
dangerous. Unexpected vehicle 
movement could occur if the parking 
brake is not set. This could cause an 
accident. Before leaving the driver’s 
seat, always set the parking brake and 
make sure the shift lever is in P.

WARNING

NOTE

If turning the key is difficult, jiggle the 
steering wheel from side to side.

NOTE

When the ignition switch is turned to 
the ON position, the sound of the fuel 
pump motor operating near the fuel 
tank can be heard. This does not 
indicate an abnormality.

J16R_8S06-EA-03H_Edition1.book  Page 2  Wednesday, July 9, 2003  4:19 PM