Owner Maintenance; Replacing Interior Light Bulbs; Maintenance and Care- Page 292

8-36

Maintenance and Care

Owner Maintenance

Form No. 8S06-EA-03H

License plate lights

1. Slide the unit as shown in the figure to 

remove it.

2. Turn the socket and bulb assembly 

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order 

of removal.

▼

Replacing Interior Light Bulbs

Overhead light/Map lights

1. Wrap a small flathead screwdriver with 

a soft cloth to prevent damage to the 
lens and remove the lens by carefully 
prying on the edge of the lens with the 
screwdriver.

2. Disconnect the bulb by pulling it out.

NOTE

An unsecured high-mount brake light 
will allow water to leak into the 
vehicle. Make sure the high-mount 
brake light is tightly fastened to the 
vehicle and if water still leaks, consult 
an Authorized Mazda Dealer.

Edge

Without sunroof, with overhead console

Edge

Without either sunroof or overhead 
console

J16R_8S06-EA-03H_Edition1.book  Page 36  Wednesday, July 9, 2003  4:19 PM