Replacing Exterior Light Bulbs- Page 320

2008 Mazda MX-5 Miata Power Retractable Hardtop Mx 5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (320,1)

WARNING

Do not replace the xenon fusion bulbs
yourself:

Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.

Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:

When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.

Always keep halogen bulbs out of the
reach of children:

Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.

q

Replacing Exterior Light Bulbs

Replacing the headlight bulbs

1. Make sure the headlight switch is off.

2. Lift the hood and find the high and low

beam bulbs in the rear of the headlight
body.
The outboard bulb is the LOW beam,
and the inboard one is the HIGH beam.

High-beam bulb

1. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector downward.

2. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

3. Install the new socket and bulb

assembly in the reverse order of
removal.

NOTE

l

If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.

l

Use the protective cover and carton of the
replacement bulb to dispose of the old bulb
promptly out of the reach of children.

Low-beam bulb

(Xenon fusion bulb)

You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.

8-38

Maintenance and Care

Owner Maintenance

MX-5_8X49-EA-07F_Edition5 Page320
Thursday, February 21 2008 12:52 AM

Form No.8X49-EA-07F

Detailed Information for 2008 Mazda MX-5 Miata Power Retractable Hardtop Mx 5 Owners Manual

Lists of information found in 2008 Mazda MX-5 Miata Power Retractable Hardtop Mx 5 Owners Manual - Page 320

  • 1. Make sure the headlight switch is off.
  • 2. Lift the hood and find the high and low beam bulbs in the rear of the headlight body.
  • 1. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.
  • 2. Turn the socket and bulb assembly to remove it.
  • 3. Install the new socket and bulb assembly in the reverse order of removal.

Related Documents for 2008 Mazda MX-5 Miata Power Retractable Hardtop Mx 5 Owners Manual