Owner Maintenance; Side turn signal lights; Maintenance and Care- Page 400

4. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector rearward.
 

5. Turn the socket and bulb assembly

counterclockwise and remove it.

6. Disconnect the bulb from the socket.

7. Install the new bulb in the reverse

order of the removal procedure.

Side turn signal lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all
the way to the right, and turn off
engine. If you are changing the left
bulb, turn the steering wheel to the left.

3. Pull the center of each plastic retainer

and remove the retainers, and then
partially peel back the mudguard.
 

Removal

In

s

tallation

4. Remove the unit by pressing the tab on

the unit with your finger and pulling
the unit forward.
 

Maintenance and Care

Owner Maintenance

6-46

MX-5_8FR4-EA-16J_Edition3

2017-3-29 20:29:26