Before Driving; Power window system initialization- Page 92

▼

Auto-opening

To fully open the window automatically,
press the switch completely down, then
release. The window will fully open
automatically.
 
To stop the window partway, pull up the
switch and then release it.

NOTE

•

The power window cannot be fully
closed while the door is open.

•

Power window system initialization
procedure

If the battery was disconnected during
vehicle maintenance, or for other
reasons (such as a switch continues to
be operated after the window is open/
closed), the window will not fully open
automatically.
The power window auto function will
only resume on the power window that
has been reset.
1. Close the doors and the convertible

top/roof.

2. Switch the ignition ON.
3. Make sure that the power window

lock switch located on the driver's
door is not depressed.

4. Press the switch and fully open the

window.

5. Pull up the switch to fully close the

window and continue holding the
switch for about 2 seconds after the
window fully closed.

6. Make sure that the power windows

operate correctly using the door
switches.

After the system has been re-initialized,
passenger window can be fully opened
automatically using the master control
switches.
 
If the automatic power window
operation does not operate normally
while the doors or convertible top/
retractable hardtop are opened/closed,
reset it using the previous procedures.

Before Driving

Windows

3-34

MX-5_8FR4-EA-16J_Edition3

2017-3-29 20:29:26