Driving Your Mazda; To Set Speed; To Increase Cruising Speed- Page 100

5-16

Driving Your Mazda

Starting and Driving

Form No. 8S15-EA-03G

▼

To Set Speed

1. Activate the cruise control system.

2. Accelerate to the desired speed, which 

must be more than 40 km/h (25 mph).

3. Turn the control knob to SET/COAST 

and release it at the speed you want. 
Release the accelerator at the same 
time.

Don’t continue to hold the knob. Until 
you release it, speed will continue to 
drop (unless you continue to 
accelerate) and you’ll miss the desired 
speed.

▼

To Increase Cruising Speed

Follow either of these procedures.

•

Turn the control knob to RESUME/
ACCEL and hold it. Your vehicle will 
accelerate.
Release the knob at the speed you 
want.

•

Accelerate to the desired speed.
Turn the control knob to SET/COAST 
and release it immediately.

NOTE

•

The SET function can’t be activated 
until about 2 seconds after the 
CRUISE MAIN switch has been 
engaged.

•

On a steep grade, the vehicle may 
momentarily slow down going up or 
speed up while going down.

Control knob

NOTE

Accelerate if you want to speed up 
temporarily when the cruise control is 
on. Greater speed will not interfere 
with it or change the set speed.
Take your foot off the accelerator to 
return to the set speed.

Control knob

Control knob

J07S_8S15-EA-03G_Edition2.book  Page 16  Thursday, August 21, 2003  10:04 AM