Interior Comfort; Audio System; Changing code number- Page 161

6-41

Interior Comfort

Audio System

Form No. 8S15-EA-03G

Changing code number

To change the code number, first cancel 
the number. Then set the new number by 
following the setting procedures.

System activation

When the power supply is disconnected or 
interrupted, the antitheft system is 
activated and the unit is rendered 
inoperative. In this condition, when power 
is again supplied, "CODE" will be 
displayed and flash unless the correct 
code number is input.
To deactivate the antitheft system and 
reset the audio unit, input your personal 
code number.

1. Press the auto memory button (

) 

and the channel preset button 6 
simultaneously until bars are 
displayed.

2. While the bars are displayed, input the 

code number as described in the setting 
procedure.

3. Press the auto memory button (

) 

and the channel preset button 6 for 
about 2 seconds. "CODE" will be 
flashed for 5 seconds, then disappear to 
indicate that the system is operable. If 
Err (error) appears, begin from Step 1.

•

Three consecutive errors will 
activate the antitheft system, and the 
audio unit will be completely 
inoperable and Err (error) will flash. 
When this happens, the unit must be 
replaced by an Authorized Mazda 
Dealer at the owner’s expense.

•

Do not allow an unauthorized 
person to attempt to input a code 
number.

CAUTION

J07S_8S15-EA-03G_Edition2.book  Page 41  Thursday, August 21, 2003  10:04 AM