Authorized Mazda Dealer- Page 183

2007 Mazda MX- 5 Miata Mx 5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (183,1)

l

When using the following devices in
the vehicle that may cause radio
interference with the receiver unit.

l

A digital device such as a personal
computer.

l

A current converter device such as a
DC-AC converter.

l

When excess snow or ice adheres to
the vehicle, especially around the
wheels.

l

When the tire pressure sensor batteries
are exhausted.

l

When using a wheel with no tire
pressure sensor installed.

l

When using tires with steel wire
reinforcement in the side walls.

l

When using tire chains.

q

Tires and Wheels

CAUTION

When inspecting or adjusting the tire air
pressures, do not apply excessive force
to the stem part of the wheel unit. The
stem part could be damaged.

Changing tires and wheels

The following procedure allows the
TPMS to recognize a tire pressure sensor's
unique ID signal code whenever tires or
wheels are changed, such as changing to
and from winter tires.

NOTE

Each tire pressure sensor has a unique
ID signal code. The signal code must be
registered with the TPMS before it can
work. The easiest way to do it is to have
an Authorized Mazda Dealer change
your tire and complete ID signal code
registration.

When having tires changed at an
Authorized Mazda Dealer

Tire pressure sensor ID signal code
registration is completed when an
Authorized Mazda Dealer changes your
vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you
or someone else can also undertake the
steps for the TPMS to complete the ID
signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then
turn it back to the ACC or LOCK
position.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive the

vehicle at a speed of at least 25 km/h
(16 mph) for 10 minutes and the tire
pressure sensor ID signal code will be
registered automatically.

Driving Your Mazda

Starting and Driving

5-31

MX-5_8V80-EA-06F_Edition3 Page183
Tuesday, August 29 2006 10:23 AM

Form No.8V80-EA-06F

Detailed Information for 2007 Mazda MX- 5 Miata Mx 5 Owners Manual

Lists of information found in 2007 Mazda MX- 5 Miata Mx 5 Owners Manual - Page 183

  • 1. After tires have been changed, turn the ignition switch to the ON position, then turn it back to the ACC or LOCK position.
  • 2. Wait for about 15 minutes.
  • 3. After about 15 minutes, drive the vehicle at a speed of at least 25 km/h (16 mph) for 10 minutes and the tire pressure sensor ID signal code will be registered automatically.

Related Documents for 2007 Mazda MX- 5 Miata Mx 5 Owners Manual