Fuses; Fuse Replacement; Owner Maintenance- Page 344

Trunk light

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
 

2. Disconnect the connector from the

unit.

3. Disconnect the bulb by pulling it out.

4. Install the new bulb in the reverse

order of the removal procedure.

Fuses

Your vehicle's electrical system is
protected by fuses.
 
If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
 
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.

▼

Fuse Replacement

Replacing the fuses on the vehicle's left
side

If the electrical system does not work, first
inspect the fuses on the vehicle's left side.
 
1. Make sure the ignition is switched off,

and other switches are off.

2. Open the fuse panel cover.

Maintenance and Care

Owner Maintenance

6-47

MX-5_8JS9-EA-20K_Edition1_old

2020-8-28 13:50:01