Owner Maintenance; Maintenance and Care- Page 341

7. Remove the screw and nut.

8. To remove the rear combination lamp

unit, insert your finger from inside the
trunk and into the hole from which the
grommet was removed in Step 5, and
while holding the lamp lens (round
part) of the rear combination lamp with
your hand, press the rear combination
lamp unit until the hook detaches from
the clip.
 

Rear combination lamp unit

Hook

Grommet installation 
hole

9. After the hook is detached, pull out the

rear combination lamp unit in the
direction of the arrow and remove it.
 

Grommet installation hole

Clip

Hook

Rear combination 
lamp unit

CAUTION

Carefully pull out the rear combination
lamp unit when removing it from the
body.
The wiring may become damaged if the
rear combination lamp unit is forcefully
pulled out.

10. Turn the socket and bulb assembly

counterclockwise and remove it.

11. Disconnect the bulb from the socket.

12. Install the new bulb in the reverse

order of the removal procedure.

Maintenance and Care

Owner Maintenance

6-44

MX-5_8JS9-EA-20K_Edition1_old

2020-8-28 13:50:01