If Trouble Arises; Flat Tire- Page 370

6. Shake the sealant bottle to mix the

contents. Then extend the injection
hose.

 Injection hose

CAUTION

Do not shake the bottle excessively.
Otherwise, the sealant could spray out
of the injection hose, and if the sealant
contacts clothing or other objects, you
may not be able to remove it.

NOTE

The sealant hardens easily and
injecting it will be difficult under cold
weather conditions (0 °C (32 °F) or
below). Warm the sealant inside the
vehicle to facilitate injection.

7. Pull out the air compressor hose and

the air compressor plug from the air
compressor.

Compressor hose

8. Install the air compressor hose which

was pulled out of the air compressor to
the injection valve of the bottle.

Compressor hose

 Injection hose

Injection 
valve

CAUTION

Make sure that the air compressor
switch is off before inserting the air
compressor hose to the injection valve
of the bottle. If the air compressor hose
is not installed to the injection valve of
the bottle securely, the sealant may
leak.

9. Remove the valve cap from the valve

of the flat tire, install the injection hose
to the tire valve, turn the sleeve to the
right, and tighten it.

Valve cap

Valve

 Injection hose

If Trouble Arises

Flat Tire

7-7

MX-5_8JS9-EA-20K_Edition1_old

2020-8-28 13:50:01