Driving Your Mazda; Security Indicator Light; Warning/Indicator Lights and Beeps- Page 133

5-43

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8R65-EA-03C

If the warning light illuminates again even 
after the tire pressures are adjusted, there 
may be a tire puncture.

Vehicles with Instant Mobility System 
(IMS) emergency flat tire repair kit

If an emergency tire repair is needed, 
repair the punctured tire with the 
emergency flat tire repair kit (page 7-5).

Vehicles with optional temporary spare 
tire

If you have bought the optional temporary 
spare tire, replace the punctured tire with 
the temporary spare tire . Refer to the 
manufacturer

’

s instructions.

Warning light flashes

When the warning light flashes, there may 
be a system malfunction. Consult an 
Authorized Mazda Dealer.

▼

Security Indicator Light

This indicator light starts flashing every 
2 seconds when the ignition switch is 
turned from the ON to the ACC position 
and the immobilizer system is armed.

The light stops flashing when the ignition 
switch is turned to the ON position with 
the correct ignition key.
At this time, the immobilizer system is 
disarmed and the light illuminates for 
about 3 seconds and then goes out.

If the engine doesn

’

t start with the correct 

ignition key, and the security indicator 
light keeps illuminating or flashing, the 
system may have a malfunction. Consult 
an Authorized Mazda Dealer.

▼

Headlight High-Beam Indicator 
Light

This light indicates one of two things:

•

The high-beam headlights are on.

•

The turn signal lever is in the flash-to-
pass position.

When replacing/repairing the tires or 
wheels or both, have the work done by 
an Authorized Mazda Dealer, or the 
tire pressure sensors may be damaged.

Do not use non-genuine tire sealant. It 
may damage the tire pressure sensor.

NOTE

A tire pressure sensor is not installed 
to the temporary spare tire. The 
warning light will flash continuously 
while the temporary spare tire is being 
used.

CAUTION

CAUTION

J60E_8R65-EA-03C_Edition6.book  Page 43  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI