Interior Comfort; Climate Control System; Foggy Windshield:- Page 158

6-8

Interior Comfort

Climate Control System

Form No. 8R65-EA-03C

▼

Ventilation

1. Press the mode selector switch to the 

 position.

2. Set the air intake selector to the 

position.

3. Set the temperature control dial to the 

desired position.

4. Set the fan control dial to the desired 

speed.

▼

Windshield Defrosting and 
Defogging

1. Press the windshield defroster switch.

2. Set the temperature control dial to the 

desired position.

3. Set the fan control dial to the desired 

speed.

When using the air conditioner while 
driving up long hills or in heavy traffic, 
closely monitor the temperature gauge 
(page 5-32).
The air conditioner may cause engine 
overheating. If the gauge indicates 
overheating, turn the air conditioner 
off.

NOTE

•

When maximum cooling is desired, 
set the temperature control dial to 
the extreme cold position and set 
the air intake selector to the 

position, then set the fan control dial 
to position 4.

•

If warmer air is desired at floor 
level, set the mode selector switch 
at the 

 position and adjust the 

temperature control dial to maintain 
maximum comfort.

•

The air to the floor is warmer than 
air to the face (except when the 
temperature control dial is set at the 
extreme hot or cold position).

CAUTION

Foggy Windshield:
Using the 

 position with the 

temperature control set to the cold 
position will cause the outside of the 
windshield to fog up. Your vision will 
be hampered, which could lead to a 
serious accident. Set the temperature 
control to the hot or warm position 
when using the 

 position.

NOTE

•

For maximum defrosting, set the 
temperature control dial to the 
extreme hot position and the fan 
control dial to position 4.

•

If warm air is desired at the floor, 
set the mode selector switch to the 

 position.

•

In the 

 or 

 position, air 

conditioning is automatically turned 
on to defrost the windshield quickly 
(however, the indicator light does 
not illuminate) and the 

position is automatically selected. 
The air intake selector switch 
cannot be changed to the 

position.

WARNING

J60E_8R65-EA-03C_Edition6.book  Page 8  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI